Install TeamViewer 8.0.20931 on RHEL/CentOS 6 32-Bit / 64-Bit / x86_64

Hello All,

I have pending comments and some mails regarding share how to on Installing TeamViewer 8 on RHEL 6.

Sorry those who requested for Howto and I am sharing it after some delay.

By Following this How to you will able to Install TeamViewer 8 on RHEL 6 32-Bit / 64-Bit / x86_64.

Pre-Requisites :-

=> Direct Internet Access

=> RPMs Download Allowed

=> User should have RPM installation Rights.

I have installed Version is :- TeamViewer 8.0.20931.

In This Howto I am Following Howto with root user, You can also follow with sudo user who have rights to install rpm :-

1. Download TeamViewer 8 from Below Link.

[root@linux-blog-tejas-barot ~] wget http://download.teamviewer.com/download/teamviewer_linux.rpm

2. Configure Repository for Dependencies :-

[root@linux-blog-tejas-barot ~] mkdir ~/repo

[root@linux-blog-tejas-barot ~] mv /etc/yum.repos.d/*.repo ~/repo/

[root@linux-blog-tejas-barot ~] wget http://www.tejasbarot.com/RPMs/tejas-teamviewer.repo

[root@linux-blog-tejas-barot ~] mv tejas-teamviewer.repo /etc/yum.repos.d/

3. Now Let’s start Installing TeamViewer 8 RPM :-

[root@linux-blog-tejas-barot ~] yum localinstall teamviewer_linux.rpm

4. Wait for Process to Complete.

5. Click on Teamviewer 8 Icon Under Applications -> Internet -> Teamviewer 8

 

TeamViewer 8 Icon

TeamViewer 8 Icon

 

6. That’s it. TeamViewer 8 is Installed and Ready to User. You can see below pic.

Teamviewer ID

Teamviewer ID

7. “ABOUT” page of Teamviewer 8. Check Teamviewer 8 Version. Below Pic reference :-

teamviewer_about

teamviewer_about

 

Hope this helps you all.

If you have any kind of issue while performing above steps please send me mail with subject [TV-RH6-291013] Including Square Bracket. Any email without inappropriate Subject will not considered. 

If you like this then Please Click Google +1 Button and Show Your Support. Your Support will encourage me to write more articles.

All Linux User’s Blog Mobile Applications :- http://www.tejasbarot.com/download-mobile-apps/

Please Keep in Touch with Social Networking :- 

Facebook :- https://www.facebook.com/tejasbarot.official

Facebook Page :- https://www.facebook.com/AllLinuxUsersBlog

Twitter :- https://www.twitter.com/imtejasbarot

LinkedIn :- http://in.linkedin.com/in/imtejasbarot

Google+ :- https://plus.google.com/113858010099582164298

Enjoy Teamviewer on RHEL 6   Enjoy Linux   Enjoy Open Source 

Content Protection by DMCA.com

You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.


2 Comments »

 
  • Sriharsha says:

    Very Useful.. Thanks.

  • Prakash Anand says:

    Hi Tejas,

    Thanks for the info to install Teamviewer on RHEL platform. I am trying to install with root user and followed the same steps as suggested. Installation shows complete but unable to see the GUI window. Below is the log… grateful if could help in this regard…

    tart: 2013/11/18 07:44:07.358
    Version: 8.0.20931
    ID: 0
    Loglevel: Info (100)
    License: 0
    Server: master1.teamviewer.com
    IC: -1374035518
    CPU: Unknown
    OS: Lx Red Hat Enterpris (32-bit)
    IP: 192.168.1.122
    MID: 0x009c02a3b53c_691c3ab9_d41d8cd98f00b204
    MIDv: 0
    Proxy-Settings: Type=1 IP= User=

    2013/11/18 07:44:07.359 20985 4152215312 S0 Using IPC-Port 5940
    2013/11/18 07:44:07.385 20985 4152215312 S0 ConsoleKitSessionInfoProvider: ConsoleKit service available
    2013/11/18 07:44:07.393 20985 4152215312 S0 ConsoleKitSession: New session /org/freedesktop/ConsoleKit/Session2 [created=2013-11-17T20:42:39.694869Z, display= remotehost= seat=/org/freedesktop/ConsoleKit/Seat1 type= x11display=:0 x11tty=/dev/tty1 loginid=1 uid=0 idle=0 active=1 local=1] SysSession_Lin: 102 [id=/org/freedesktop/ConsoleKit/Session2, type=2 user=root tty=4294967295 pseudotty=0 state=undef active=1 reliable=0 info=0]]
    2013/11/18 07:44:07.393 20985 4152215312 S0 ConsoleKitSeat: New seat /org/freedesktop/ConsoleKit/Seat1 [canActivateSession=1, activeSession=’/org/freedesktop/ConsoleKit/Session2′]
    2013/11/18 07:44:07.393 20985 4152215312 S0 Session Information provided by ConsoleKit
    2013/11/18 07:44:07.395 20985 4152215312 S0 XSocketSessionObserver: watching /tmp/.X11-unix
    2013/11/18 07:44:07.464 20985 4152215312 S0! XSession: Unable to open XAuthority file “/root/.Xauthority”
    2013/11/18 07:44:07.481 20985 4152215312 S0! XSession: Unable to open XAuthority file “/root/.Xauthority”
    2013/11/18 07:44:07.489 20985 4152215312 S0 UpdateOnlineState newOnlineValue 0
    2013/11/18 07:44:08.360 20985 4139776880 S0 TerminalServer::SessionLogin for session 0
    2013/11/18 07:44:08.360 20985 4139776880 S0 CTerminalServer::RepeatedlyCheckForUserLogin() Don’t start GUI for session 0

    Kind Regards,
    Prakash

 

Leave a Reply

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


8 − = six