About Me

Tejas Barot
Sr. Linux Administrator
Drive-In-Road,

Ahmedabad – 380059

Gujarat
India

Note :- Not all posts are original it can be taken from some other blog or website . No Guarantee on any solutions from this blog.

 

Content Protection by DMCA.com

46 Comments »

 
  • હેમંત says:

    but i have no idea how to use squid !
    can u give easy step with command ?

    thx……..&…replay

  • Tejas Barot says:

    Hi Hemant, Yes You can do it by using squid.

  • હેમંત says:

    Hi, Mr.Tejas
    i have two lan card system and installed ubuntu 13.10
    other two system connected with ubuntu13.10 via Network switch.
    i restricted some site on other two system and full accessed on ubuntu how to it possible
    Please guide easy step
    thx..

  • Tejas Barot says:

    Hi, No as of now there is no portable teamviewer on Linux as far as i know.

  • nabilishes says:

    Is it possible to run teamviewer portable on a linux running on CEntOS with no root access. I’ve been trying to make it work but to no avail

  • sheebanashai says:

    I am trying to reset password for admin.

    when i go to the bios menu …. root option

    it asks for previous root password? …

  • Tejas Barot says:

    Hello,
    Try to install using yum repositories or RPM instead of web browser.

  • S B SHANKAR says:

    Sir

    My system is running on Fedora 18. I am trying to install adobe flash player plugin for firefox. But always failed to install. Can you help in this regard.

  • Tejas Barot says:

    Hi,

    Please let me know what scenario you are trying and what exact error you are facing. My Contact details are mentioned on blog or social networks.

  • SUSANNA says:

    sir

    l have some problems in rhevm configration

  • Dirghayu says:

    Hi Tejas sir.
    I’m using “talk” command from my virtual to physical.
    And this three line’s are prompting in my physical terminal.

    Message from Talk_Daemon@desktopX.example.com at 15:35 …
    talk: connection requested by root@serverX.example.com.
    talk: respond with: talk root@serverX.example.com

    can tell me is thare any log file from this three lines come and prompt.
    I want to know this.
    Thank you…

  • Tejas Barot says:

    Hello,

    Thanks for your comment. It means a lot to me. Just writing blogs to help Linux and Open Source People.

    Thanks once again.

  • Laxman patil says:

    Hi Tejas

    Your great!!!!!!!!!!!!!

    your blog very very important us

    Regards
    Laxman

  • Tejas Barot says:

    Hello,

    You can’t download any RHEL without Subscription. You can try CentOS 6 as clone of it !

    Hope this helps you !

  • mahmoud says:

    hello :
    can i ask u about redhat enterprise linux 6 32 bit
    i want to download it
    can i find that here :)
    i hope that
    thx
    urs : mahmoud

  • Tejas Barot says:

    Thanks Hemant, It means a lot.

  • Hemant Dige says:

    Hello sir,

    your blogs very very important us

    Thanks to you

  • Sandeep says:

    HI Tejas,

    I am trying to install Teamviewer on my rhel 6.4 system but i am not able to complete it. the problem that i am facing is dependencies are being resolved. i am using epel repo.

    please guide me how can i do that.

    Thnx in adv

    Sandeep

  • Hemant Dige says:

    Hello sir,

    i want to learn how to configure squid proxy in redhat 5.1

    Please proper guide me

    Hemant Dige

  • Madhav says:

    Hello Tejas,
    I am using Ubuntu 12.04 LTS. My cpu is having two network cards. I want to use one network card for local lan i.e. static IP and one for broadband i.e. DHCP. At a time both cards are not working. IN RHEL5 is is working. Pl. inform.

    Madhav

  • Tejas Barot says:

    Hello,

    There are some timeout in Log which you provided so There is Some Breakage in Internet Connection while installing packages.

  • Tejas Barot says:

    Hi Roshan,

    Glad you like the Articles on the website. I am not Guru Just Learning and Sharing the things which I know.

    Comments like you inspire me to write and share.

  • Dany says:

    Hi Tejas!

    I followed correctly your instructions given here but I got and ERROR.
    Please check out at the bottom.

    Howto:Installing VLC Player on RHEL 6.x & CentOS 6.x | Linux | 32 bit | 64 bit ( x86_64) | Using Script

    [tguest@tav01 vlc-for-RHEL6.x-or-on-Centos6.x]$ su
    Password:
    [root@tav01 vlc-for-RHEL6.x-or-on-Centos6.x]# rpm -ivh avrc6-tejas-barot-linux-0.1.0-1.el6.i386.rpm
    Preparing… ########################################### [100%]
    1:avrc6-tejas-barot-linux########################################### [100%]

    To Remove RPM Execute Following Command as root:
    rpm -e avrc6-tejas-barot-linux-0.1.0-1.el6.i386 –nodeps

    RPM Created by Tejas Barot ( All Linux User’s Blog)
    URL:- http://www.tejasbarot.com

    Please Don’t Forget to Comment if it works for you.
    For Feedback and Errors mail me on

    Thanks for Using RPM, Enjoy Linux and Open Source

    [root@tav01 vlc-for-RHEL6.x-or-on-Centos6.x]# chmod +x vlc6-installation.sh
    [root@tav01 vlc-for-RHEL6.x-or-on-Centos6.x]# ./vlc6-installation.sh

    Press (R32) to Install VLC on RHEL 6.x on 32bit
    Press (R64) to Install VLC on RHEL 6.x on 64bit

    Press (C32) to Install VLC on CentOS 6.x on 32bit
    Press (C64) to Install VLC on CentOS 6.x on 64bit
    Press (E) to Exit anytime

    Please Enter your Selection:C32
    You have selected VLC Installation for CentOS 6.x…. Just Sit back and Relax…..
    You are running as a root, Moving to next step…..
    6.3
    You can continue, Your CentOS Linux version is (Final)
    Installing Tejas Barot’s RPM…..
    Creating Temp Directories…..
    Configuring New Repositories……
    NON GUI Download Client is already installed.
    You are good to go, All Repository is already configured….
    Loaded plugins: fastestmirror, refresh-packagekit, security
    Existing lock /var/run/yum.pid: another copy is running as pid 5303.
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 17 M RSS ( 32 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:09 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 17 M RSS ( 32 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:11 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 17 M RSS ( 32 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:13 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 22 M RSS ( 37 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:15 ago
    State : Running, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 18 M RSS (195 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:17 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 18 M RSS (165 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:19 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 18 M RSS (155 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:21 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 18 M RSS (155 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:23 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 18 M RSS (155 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:25 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 18 M RSS (165 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:27 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 18 M RSS (155 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:29 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 18 M RSS (135 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:31 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 18 M RSS (105 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:33 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 18 M RSS (105 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:35 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 28 M RSS ( 75 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:37 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 28 M RSS ( 75 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:39 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 34 M RSS ( 81 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:41 ago
    State : Running, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 29 M RSS ( 76 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:43 ago
    State : Sleeping, pid: 5303
    Another app is currently holding the yum lock; waiting for it to exit…
    The other application is: PackageKit
    Memory : 29 M RSS ( 76 MB VSZ)
    Started: Fri May 3 01:05:28 2013 – 00:45 ago
    State : Sleeping, pid: 5303
    Loading mirror speeds from cached hostfile
    * rpmforge: mirror1.hs-esslingen.de
    Setting up Install Process
    Resolving Dependencies
    –> Running transaction check
    —> Package vlc.i686 0:1.1.13-1.el6.rf will be installed
    –> Processing Dependency: libliveMedia.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libva-x11.so.1 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libportaudio.so.2 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libdvdnav.so.4 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libdvdread.so.4 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libml.so.2.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libcxcore.so.2.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libcaca.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libmad.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libdc1394.so.22 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libavcodec.so.52 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libgroupsock.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libzvbi.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: liba52.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libavformat.so.52 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libdirac_decoder.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libpostproc.so.51 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libfribidi.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libvgagl.so.1 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libavcodec.so.52(LIBAVCODEC_52) for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libass.so.4 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libpostproc.so.51(LIBPOSTPROC_51) for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libUsageEnvironment.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libthreadutil.so.2 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libva.so.1 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libtwolame.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libmodplug.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libschroedinger-1.0.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libavutil.so.50(LIBAVUTIL_50) for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libkate.so.1 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libdirac_encoder.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libmpeg2.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libvga.so.1 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libebml.so.2 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libupnp.so.3 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libavutil.so.50 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libBasicUsageEnvironment.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libx264.so.107 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libcvaux.so.2.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libfaad.so.2 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libswscale.so.0(LIBSWSCALE_0) for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libswscale.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libavformat.so.52(LIBAVFORMAT_52) for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libhighgui.so.2.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libcv.so.2.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libcddb.so.2 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libSDL_image-1.2.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libdca.so.0 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libixml.so.2 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libdvbpsi.so.6 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libmatroska.so.2 for package: vlc-1.1.13-1.el6.rf.i686
    –> Processing Dependency: libaa.so.1 for package: vlc-1.1.13-1.el6.rf.i686
    –> Running transaction check
    —> Package SDL_image.i686 0:1.2.10-1.el6.rf will be installed
    —> Package a52dec.i686 0:0.7.4-8.el6.rf will be installed
    —> Package aalib.i686 0:1.4.0-5.el6.rf will be installed
    —> Package dirac.i686 0:1.0.2-1.el6.rf will be installed
    –> Processing Dependency: libcppunit-1.12.so.1 for package: dirac-1.0.2-1.el6.rf.i686
    —> Package faad2.i686 0:2.7-1.el6.rf will be installed
    —> Package ffmpeg.i686 0:0.6.5-1.el6.rf will be installed
    –> Processing Dependency: libopencore-amrnb.so.0 for package: ffmpeg-0.6.5-1.el6.rf.i686
    –> Processing Dependency: libfaac.so.0 for package: ffmpeg-0.6.5-1.el6.rf.i686
    –> Processing Dependency: libopencore-amrwb.so.0 for package: ffmpeg-0.6.5-1.el6.rf.i686
    –> Processing Dependency: librtmp.so.0 for package: ffmpeg-0.6.5-1.el6.rf.i686
    –> Processing Dependency: libmp3lame.so.0 for package: ffmpeg-0.6.5-1.el6.rf.i686
    —> Package ffmpeg-libpostproc.i686 0:0.6.5-1.el6.rf will be installed
    —> Package fribidi.i686 0:0.10.9-1.el6.rf will be installed
    —> Package libass.i686 0:0.9.11-1.el6.rf will be installed
    –> Processing Dependency: libenca.so.0 for package: libass-0.9.11-1.el6.rf.i686
    —> Package libcaca.i686 0:0.99-0.1.beta17.el6.rf will be installed
    –> Processing Dependency: libglut.so.3 for package: libcaca-0.99-0.1.beta17.el6.rf.i686
    —> Package libcddb.i686 0:1.3.1-1.el6.rf will be installed
    —> Package libdc1394.i686 0:2.1.2-3.4.el6 will be installed
    —> Package libdca.i686 0:0.0.5-1.el6.rf will be installed
    —> Package libdvbpsi.i686 0:0.1.7-1.el6.rf will be installed
    —> Package libdvdnav.i686 0:0.1.10-3.el6.rf will be installed
    —> Package libdvdread.i686 0:4.1.4-0.3.svn1183.el6 will be installed
    —> Package libebml.i686 0:1.0.0-1.el6.rf will be installed
    —> Package libkate.i686 0:0.3.7-1.el6.rf will be installed
    —> Package libmad.i686 0:0.15.1b-4.el6.rf will be installed
    —> Package libmatroska.i686 0:1.0.0-1.el6.rf will be installed
    —> Package libmodplug.i686 0:0.8.7-1.el6.rf will be installed
    —> Package libmpeg2.i686 0:0.5.1-2.el6.rf will be installed
    —> Package libupnp.i686 0:1.6.6-1.el6.rf will be installed
    —> Package libva.i686 0:1.0.6-1.el6.rf will be installed
    —> Package live555.i686 0:0-0.27.2012.02.04.el6.rf will be installed
    —> Package opencv.i686 0:2.0.0-9.el6 will be installed
    –> Processing Dependency: libunicap.so.2 for package: opencv-2.0.0-9.el6.i686
    –> Processing Dependency: libucil.so.2 for package: opencv-2.0.0-9.el6.i686
    —> Package portaudio.i686 0:19-1.20071207.el6.rf will be installed
    —> Package schroedinger.i686 0:1.0.10-1.el6.rf will be installed
    –> Processing Dependency: liborc-0.4.so.0 for package: schroedinger-1.0.10-1.el6.rf.i686
    —> Package svgalib.i686 0:1.9.25-1.el6.rf will be installed
    —> Package twolame.i686 0:0.3.13-1.el6.rf will be installed
    —> Package x264.i686 0:0.0.0-0.4.20101111.el6.rf will be installed
    —> Package zvbi.i686 0:0.2.33-2.el6.rf will be installed
    –> Running transaction check
    —> Package cppunit.i686 0:1.12.1-3.1.el6 will be installed
    —> Package enca.i686 0:1.10-1.el6.rf will be installed
    —> Package faac.i686 0:1.26-1.el6.rf will be installed
    —> Package freeglut.i686 0:2.6.0-1.el6 will be installed
    —> Package lame.i686 0:3.99.5-1.el6.rf will be installed
    —> Package librtmp.i686 0:2.3-1.el6.rf will be installed
    —> Package opencore-amr.i686 0:0.1.2-1.el6.rf will be installed
    —> Package orc.i686 0:0.4.11-1.el6.rf will be installed
    —> Package unicap.i686 0:0.9.5-7.el6 will be installed
    –> Finished Dependency Resolution

    Dependencies Resolved

    ======================================================================================================
    Package Arch Version Repository Size
    ======================================================================================================
    Installing:
    vlc i686 1.1.13-1.el6.rf rpmforge 14 M
    Installing for dependencies:
    SDL_image i686 1.2.10-1.el6.rf rpmforge 82 k
    a52dec i686 0.7.4-8.el6.rf rpmforge 82 k
    aalib i686 1.4.0-5.el6.rf rpmforge 167 k
    cppunit i686 1.12.1-3.1.el6 tejas-barot-vlc 153 k
    dirac i686 1.0.2-1.el6.rf rpmforge 2.1 M
    enca i686 1.10-1.el6.rf rpmforge 166 k
    faac i686 1.26-1.el6.rf rpmforge 137 k
    faad2 i686 2.7-1.el6.rf rpmforge 302 k
    ffmpeg i686 0.6.5-1.el6.rf rpmforge 2.6 M
    ffmpeg-libpostproc i686 0.6.5-1.el6.rf rpmforge 23 k
    freeglut i686 2.6.0-1.el6 tejas-barot-vlc 166 k
    fribidi i686 0.10.9-1.el6.rf rpmforge 67 k
    lame i686 3.99.5-1.el6.rf rpmforge 634 k
    libass i686 0.9.11-1.el6.rf rpmforge 142 k
    libcaca i686 0.99-0.1.beta17.el6.rf rpmforge 327 k
    libcddb i686 1.3.1-1.el6.rf rpmforge 97 k
    libdc1394 i686 2.1.2-3.4.el6 tejas-barot-vlc 118 k
    libdca i686 0.0.5-1.el6.rf rpmforge 127 k
    libdvbpsi i686 0.1.7-1.el6.rf rpmforge 76 k
    libdvdnav i686 0.1.10-3.el6.rf rpmforge 200 k
    libdvdread i686 4.1.4-0.3.svn1183.el6 tejas-barot-vlc 63 k
    libebml i686 1.0.0-1.el6.rf rpmforge 242 k
    libkate i686 0.3.7-1.el6.rf rpmforge 99 k
    libmad i686 0.15.1b-4.el6.rf rpmforge 72 k
    libmatroska i686 1.0.0-1.el6.rf rpmforge 590 k
    libmodplug i686 0.8.7-1.el6.rf rpmforge 376 k
    libmpeg2 i686 0.5.1-2.el6.rf rpmforge 140 k
    librtmp i686 2.3-1.el6.rf rpmforge 103 k
    libupnp i686 1.6.6-1.el6.rf rpmforge 246 k
    libva i686 1.0.6-1.el6.rf rpmforge 155 k
    live555 i686 0-0.27.2012.02.04.el6.rf rpmforge 810 k
    opencore-amr i686 0.1.2-1.el6.rf rpmforge 359 k
    opencv i686 2.0.0-9.el6 tejas-barot-vlc 4.4 M
    orc i686 0.4.11-1.el6.rf rpmforge 297 k
    portaudio i686 19-1.20071207.el6.rf rpmforge 258 k
    schroedinger i686 1.0.10-1.el6.rf rpmforge 555 k
    svgalib i686 1.9.25-1.el6.rf rpmforge 718 k
    twolame i686 0.3.13-1.el6.rf rpmforge 117 k
    unicap i686 0.9.5-7.el6 tejas-barot-vlc 157 k
    x264 i686 0.0.0-0.4.20101111.el6.rf rpmforge 1.0 M
    zvbi i686 0.2.33-2.el6.rf rpmforge 837 k

    Transaction Summary
    ======================================================================================================
    Install 42 Package(s)

    Total download size: 33 M
    Installed size: 122 M
    Downloading Packages:
    (1/42): SDL_image-1.2.10-1.el6.rf.i686.rpm | 82 kB 00:00
    (2/42): a52dec-0.7.4-8.el6.rf.i686.rpm | 82 kB 00:00
    (3/42): aalib-1.4.0-5.el6.rf.i686.rpm | 167 kB 00:00
    http://mirror.centos.org/centos-6/6/os/i386/Packages/cppunit-1.12.1-3.1.el6.i686.rpm: [Errno 12] Timeout on http://mirror.centos.org/centos-6/6/os/i386/Packages/cppunit-1.12.1-3.1.el6.i686.rpm: (28, ‘Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds’)
    Trying other mirror.
    (5/42): dirac-1.0.2-1.el6.rf.i686.rpm | 2.1 MB 00:03
    (6/42): enca-1.10-1.el6.rf.i686.rpm | 166 kB 00:00
    (7/42): faac-1.26-1.el6.rf.i686.rpm | 137 kB 00:00
    (8/42): faad2-2.7-1.el6.rf.i686.rpm | 302 kB 00:00
    (9/42): ffmpeg-0.6.5-1.el6.rf.i686.rpm | 2.6 MB 00:04
    (10/42): ffmpeg-libpostproc-0.6.5-1.el6.rf.i686.rpm | 23 kB 00:00
    (11/42): freeglut-2.6.0-1.el6.i686.rpm | 166 kB 00:00
    (12/42): fribidi-0.10.9-1.el6.rf.i686.rpm | 67 kB 00:00
    (13/42): lame-3.99.5-1.el6.rf.i686.rpm | 634 kB 00:01
    (14/42): libass-0.9.11-1.el6.rf.i686.rpm | 142 kB 00:00
    (15/42): libcaca-0.99-0.1.beta17.el6.rf.i686.rpm | 327 kB 00:00
    (16/42): libcddb-1.3.1-1.el6.rf.i686.rpm | 97 kB 00:00
    (17/42): libdc1394-2.1.2-3.4.el6.i686.rpm | 118 kB 00:00
    (18/42): libdca-0.0.5-1.el6.rf.i686.rpm | 127 kB 00:00
    (19/42): libdvbpsi-0.1.7-1.el6.rf.i686.rpm | 76 kB 00:00
    (20/42): libdvdnav-0.1.10-3.el6.rf.i686.rpm | 200 kB 00:00
    (21/42): libdvdread-4.1.4-0.3.svn1183.el6.i686.rpm | 63 kB 00:00
    (22/42): libebml-1.0.0-1.el6.rf.i686.rpm | 242 kB 00:00
    (23/42): libkate-0.3.7-1.el6.rf.i686.rpm | 99 kB 00:00
    (24/42): libmad-0.15.1b-4.el6.rf.i686.rpm | 72 kB 00:00
    (25/42): libmatroska-1.0.0-1.el6.rf.i686.rpm | 590 kB 00:01
    (26/42): libmodplug-0.8.7-1.el6.rf.i686.rpm | 376 kB 00:00
    (27/42): libmpeg2-0.5.1-2.el6.rf.i686.rpm | 140 kB 00:00
    (28/42): librtmp-2.3-1.el6.rf.i686.rpm | 103 kB 00:00
    (29/42): libupnp-1.6.6-1.el6.rf.i686.rpm | 246 kB 00:00
    (30/42): libva-1.0.6-1.el6.rf.i686.rpm | 155 kB 00:00
    (31/42): live555-0-0.27.2012.02.04.el6.rf.i686.rpm | 810 kB 00:01
    (32/42): opencore-amr-0.1.2-1.el6.rf.i686.rpm | 359 kB 00:00
    (33/42): opencv-2.0.0-9.el6.i686.rpm | 4.4 MB 00:06
    (34/42): orc-0.4.11-1.el6.rf.i686.rpm | 297 kB 00:00
    (35/42): portaudio-19-1.20071207.el6.rf.i686.rpm | 258 kB 00:00
    (36/42): schroedinger-1.0.10-1.el6.rf.i686.rpm | 555 kB 00:00
    (37/42): svgalib-1.9.25-1.el6.rf.i686.rpm | 718 kB 00:01
    (38/42): twolame-0.3.13-1.el6.rf.i686.rpm | 117 kB 00:00
    (39/42): unicap-0.9.5-7.el6.i686.rpm | 157 kB 00:00
    (40/42): vlc-1.1.13-1.el6.rf.i686.rpm | 14 MB 00:21
    (41/42): x264-0.0.0-0.4.20101111.el6.rf.i686.rpm | 1.0 MB 00:01
    (42/42): zvbi-0.2.33-2.el6.rf.i686.rpm | 837 kB 00:01

    Error Downloading Packages:
    cppunit-1.12.1-3.1.el6.i686: failure: Packages/cppunit-1.12.1-3.1.el6.i686.rpm from tejas-barot-vlc: [Errno 256] No more mirrors to try.

    There is something wrong with your Internet Connection..Or You forgot some step.
    Restoring your Previous repositories……

    [root@tav01 vlc-for-RHEL6.x-or-on-Centos6.x]#

    There isn’t any issue with internet connection.

    Please tell me how to resolve this. Thank you.

  • Roshan says:

    Hello Tejas Bhai
    Your site is the best resource I came across for installation and troubleshooting of linux. You are really a guru.
    Thank you for being such a nice resource.

  • Kris says:

    Hi Tejas,
    Could u make a guide on how to install XBMC on RHEL 6.x OS.

    Gr8 Blog.. Keep up the good work buddy !

  • G.T.RAO says:

    Greetings ,

    “JOIN WITH US FREE SOFTWARE AWARENESS CAMPAIGN IN GUJRAT ”

    ( More then 25000 thousands software’s under gpl.)

    What is Software Freedom ? Software Freedom is a worldwide
    celebration of Free and Open Source Software (FOSS). Our goal in this
    celebration is to educate the worldwide public about the benefits of using
    high quality FOSS in education, in government, at home, and in business –
    in short, everywhere! What is Free Software and why is it relevant to you?
    Free Software gives users the freedom to use, study, modify and
    redistribute the software without worrying about licensing and
    copyrights.This means there is no per-seat licensing unlike
    proprietary software and you are free to install it on as many systems
    as you like.

    Regards
    Team fossyatra

  • Tejas Barot says:

    Hi Mihir,

    I will try and will update you on the same.

  • Mihir says:

    Hi tejasbhai I want to install gimp on my rhel 6…I have this package gimp-2.6.9.tar.gz copied from somewhere….where sholld I start…

    I have extracted the content and tried this

    [mihir.261@om gimp-2.6.9]$ ./configure
    checking for a BSD-compatible install… /usr/bin/install -c
    checking whether build environment is sane… yes
    checking for a thread-safe mkdir -p… /bin/mkdir -p
    checking for gawk… gawk
    checking whether make sets $(MAKE)… yes
    checking for gcc… no
    checking for cc… no
    checking for cl.exe… no
    configure: error: in `/home/mihir.261/gimp-2.6.9′:
    configure: error: no acceptable C compiler found in $PATH
    See `config.log’ for more details.
    [mihir.261@om gimp-2.6.9]$ make
    make: *** No targets specified and no makefile found. Stop.
    [mihir.261@om gimp-2.6.9]$ make install
    make: *** No rule to make target `install’. Stop.
    [mihir.261@om gimp-2.6.9]$

    What should I do now…just new to linux

  • Tejas Barot says:

    Hello Jayesh,

    What Kind of Reference you want ?

  • jayesh says:

    pls give me ur reference sir. pls……

  • jayesh says:

    hi tejas
    pls give me linux interview questions and answers

  • Tejas Barot says:

    Hello My Friend Tushar (D),

    Its very good to see your comment.

    Thanks for comment.

  • Tushar says:

    Dear you are rock.

    Thanks friend,

    Tushar
    Accenture-mumbai

  • Tushar says:

    Hi Tejas, just reviewed your site. It is very very good site.
    It is very helpful to professional users in Linux.

    Thanks friend such contribution.

    Rgds,
    Tushar Vadhawana
    Accenture-Mumbai

  • Mitesh Patel says:

    How to connect java plug in in fedora 16 and ubuntu 11.04

  • kalyan says:

    hai tejas, could u please tell me how to mount ntfs filesystem in rhel5….do u have any script for ntfs-3g…plz send immediatly..

  • Tejas Barot says:

    Hi,
    Can you please tell me by using which method you have tried to install google video chat ??? If you can post link here then it would be better for me to find out the issue and help you to resolve issue, Thanks.

  • Deepika says:

    Hi,
    I tried to install Video chat in my fedora13 system but my firefox has gone corrupt since then. Whenever I start firefox it gets closed automatically. Can you please tell me what could have possibly gone wrong.

  • Tejas Barot says:

    Hello,

    Please do send me that Book, I will surely write it if it suits to open source and Linux Subject. For Further I have sent you a mail.

    Thanks for your mail Sean.

  • Sean Palanna says:

    Hi Tejas,

    I came across a lot of resourceful article on Linux on your website. Its great to see your contribution towards the Linux community. It is clear that you have a great deal of knowledge in this subject and a large number of people who are interested in what you have to say on the subject.

    I work for a publishing company called Packt, which specializes in publishing tutorials and guidebooks on a wide range of software. Linux is an area into which we publish frequently.
    I wonder whether you are aware of the fact that we have just published a new book on Linux Shell Scripting Cookbook ? Can I ask if you would be interested in reviewing this title and writing a review for this book on your website and on Amazon? If you are, then I would be happy to send you a copy of the book.

    If this is not of interest you, that’s no problem, although feel free to let me know if there is anything else which we can do for you. I could provide you with some unique Articles from this book which you can put up on your website.

    I look forward to your reply.

    Regards,

    Sean

  • milap says:

    hi tejas…
    it’s really such a wonderful bolg.
    good going buddy…go ahead dude…

    from
    milap amin

  • Tejas Barot says:

    Its nice to see your comment sir

    thanks.

  • Hi Tejas,

    Its really nice to see you so active, and its really a great job.
    Keep it up.

    Regards,
    Shyam

 

Leave a Reply

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


+ 7 = eight