Howto: Installing WINE on RHEL / CentOS 5.x / 6.x | 32-bit | 64-bit | x86_64 | Linux

Hello All,

There are so many request from blog visitors to write Article on Wine Installation. Thanks for your request.

This article is for Install Wine on CentOS and RHEL 5.x and 6.x easily. Actually i have planned this article through script but due to shortage of time and now a days busy too, So Couldn’t implement complete script so Demonstrating manual how to over here.

I hope you guys will like the same.

Like VLC installation on Red Hat Enterprise Linux 5.x and 6.x and CentOS 5.x and 6.x its bit complicated and So much dependencies issues are there. So To make installation a bit easier and without too much headache i am writing this article.

This HOWTO performed on Blank RHEL / CentOS 5.x and 6.x if you are running with Latest or OLD RPMs you might face issue of Dependencies. Do it at your own risk wherever you are performing this howto.

To Install WINE on RHEL/CentOS 5.x and 6.x, Perform following Howto.

For RHEL / CentOS 6 32-Bit and 64-Bit (x86_64) :-

1. You need to be root to perform rest steps.

2. This step is must otherwise you might face dependencies issues. Now Lets take a backup of your Original Repository. By Executing Following Command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mkdir /repobackup
[root@wine-on-linux-ahmedabad-tejas-barot ~]#mv /etc/yum.repos.d/*.repo /repobackup/

3. Now Clean Previously Cached Repository by Executing Following command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum clean all

4. Now Download and Install EPEL and Tejas Barot’s RPM for Wine to Install Wine on RHEL / CentOS 6.x.

To Download RPMs :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# cd /tmp
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# wget http://www.tejasbarot.com/RPMs/epel-release-6-7.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# wget http://www.tejasbarot.com/RPMs/wine-install-tejas-barot-2.0-2.noarch.rpm

To Install RPMs :-

[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force epel-release-6-7.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force wine-install-tejas-barot-2.0-2.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# cd

5. To install wine and its Packages execute following command :-

[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum install –nogpgcheck wine*

When it ask for”YES”and”NO”Please go ahead with your choice.

6. That’s it, You are done now. Wine Installed Successfully.

7. Now Revert your previous repositories. by Following commands
[root@wine-on-linux-ahmedabad-tejas-barot ~]# rm -rf /etc/yum.repos.d/*.repo
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mv /repobackup/*.repo /etc/yum.repos.d/

8. That’s It now. You have installed wine on RHEL / CentOS 6x Successfully and Your Previous Repositories also reverted back.

For RHEL / CentOS 5.x 32-Bit and 64-Bit (x86_64) :-

1. You need to be root to perform rest steps.

2. This step is must otherwise you might face dependencies issues. Now Lets take a backup of your Original Repository. By Executing Following Command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mkdir /repobackup
[root@wine-on-linux-ahmedabad-tejas-barot ~]#mv /etc/yum.repos.d/*.repo /repobackup/

3. Now Clean Previously Cached Repository by Executing Following command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum clean all

4. Now Download and Install EPEL and Tejas Barot’s RPM for Wine to Install Wine on RHEL / CentOS 5.x.

To Download RPMs :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# cd /tmp
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# wget http://www.tejasbarot.com/RPMs/epel-release-5-4.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]#wget http://www.tejasbarot.com/RPMs/wine-install-tejas-barot-1.0-1.noarch.rpm

To Install RPMs :-

[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force epel-release-5-4.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force wine-install-tejas-barot-1.0-1.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# cd

5. To install wine and its Packages execute following command :-

[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum install –nogpgcheck wine*

When it ask for”YES”and”NO”Please go ahead with your choice.

6. That’s it, You are done now. Wine Installed Successfully.

7. Now Revert your previous repositories. by Following commands
[root@wine-on-linux-ahmedabad-tejas-barot ~]# rm -rf /etc/yum.repos.d/*.repo
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mv /repobackup/*.repo /etc/yum.repos.d/

8. That’s It now. You have installed wine on RHEL / CentOS 5.x Successfully and Your Previous Repositories also reverted back.

Hope this will helps you, Waiting for your feedback.

If you like this then Please Click Google +1 Button and Show Your Support. Your Support will encourage me to write more articles.

All Linux User’s Blog Mobile Applications :- http://www.tejasbarot.com/download-mobile-apps/

Enjoy Wine on Red Hat Enterprise Linux and CentOS 5.x and 6.x 🙂 Enjoy Linux 🙂 Enjoy Open Source 🙂

Howto: Installing Google Chrome on RHEL 6 for x86 and x86_64 | Red Hat Enterprise Linux 6

Hello Guys,

Today, I am sharing one Howto for Google Chrome on RHEL 6.You can follow this how to on both Architecture. 32bit and 64 bit. By Following this steps you’ll able to Install Google Chrome in Just Two Steps.

Google Chrome is not supported on RHEL 5.x/ CentOS 5.x as there is a older libraries and RPM Issues, But in Red Hat Enterprise Linux 6 Yon install Google Chrome without any dependency issue.

Its lot easy to install Google Chrome on RHEL 6. You just Need to follow the steps and thats is you will able to install Google Chrome on RHEL 6.

To Install Google Chrome on Red Hat Enterprise Linux you have to use Google’s YUM repository itself.

Following are the requirements to Install Google Chrome on RHEL 6 :-

1) You have to be root to follow this how to.
2) YUM should work from Terminal.
3) Following RPM Must be installed
redhat-lsb-4.0-2.1.el6.i686
libcurl-7.19.7-16.el6.i686
If you are using x86_64 (64bit then RPM Architecture looks like following )

redhat-lsb-4.0-2.1.el6.x86_64
libcurl-7.19.7-16.el6.x86_64

If you have not installed above RPMs don’t worry, Above both RPMs available in Installation Media so you can install it easily.

To Install Google Chrome on 32bit Perform Following Steps :-

1) Execute Following Command as a root to setup Google Repository.
wget http://tejasbarot.com/RPMs/google-chrome-i386.repo -O /etc/yum.repos.d/google-chrome-i386.repo

2) Now Execute Following Command as a root to Install Google Chrome on RHEL 6  :-
[tejas_barot@tejasbarot ~]#yum -y install google-chrome-stable

As per your Internet connection speed it will be installed, So Wait for Few Minutes until it gets Installed.

3) To Use Google Chrome on RHEL 6, Perform Following :-
Click on Applications -> Internet -> Click on Google Chrome

That’s It. Start Using Google Chrome on Red Hat Enterprise Linux 6. 🙂

To Install Google Chrome on x86_64 (64bit) Perform Following Steps :-

1) Execute Following Command as a root to setup Google Repository.
wget http://tejasbarot.com/RPMs/google-chrome-64bit.repo -O /etc/yum.repos.d/google-chrome-64bit.repo

2) Now Execute Following Command as a root to Install Google Chrome on RHEL 6  :-
[tejas_barot@tejasbarot ~]#yum -y install google-chrome-stable

As per your Internet connection speed it will be installed, So Wait for Few Minutes until it gets Installed.

3) To Use Google Chrome on RHEL 6, Perform Following :-
Click on Applications -> Internet -> Click on Google Chrome

That’s It for x86_64 ( 64bit). Start Using Google Chrome on Red Hat Enterprise Linux 6. 🙂

Let me know threw comment if you face any issues

Waiting for your Feedback Guys.

Enjoy Google Chrome on Linux 🙂 Enjoy Google Chrome on RHEL 6 🙂 Enjoy Linux 🙂 Enjoy Open Source 🙂

 

Configuring Subversion on Ubuntu

Hi Friends,

I am sharing method to configure Simple Subverion with Basic Authentication on Ubuntu.

To Install Subversion Open Terminal and Execute Following Commands :-
sudo apt-get install subversion libapache2-svn

Now Create Subversion repository in /svn (You can choose your own path)
sudo svnadmin create /svn

Give this permission to that /svn folder

sudo chown -R www-data:www-data /svn

Now We need to edit configuration file to add webDAV module :-
sudo vim /etc/apache2/mods-enabled/dav_svn.conf

The Location elements in configuration file dictates the root directory of subversion.
<Location /svn>
You have to uncomment The DAV line to Enable DAV Module:-
DAV svn (uncomment this line)

Now you have to set the same path which you created with svnadmin command
SVNPath /svn 

To Enable Authentication you need to uncomment Following Three Lines:-
AuthType Basic
AuthName “Subversion Repository”
AuthUserFile /etc/apache2/dav_svn.passwd

To Create user on the repository use, execute following command:
sudo htpasswd2 -cm /etc/apache2/dav_svn.passwd <username>
(
-c use for creating First time user and -m use for enctrypting your in md5 enctyption method)

Restart your apache2 service by executing this command:-
sudo /etc/init.d/apache2 restart

Now test your repository by this way :-
From Local PC :-  http://localhost/svn
From  Remote PC :- http://<your-subversion-computer-ip>/svn

Now If you want all user must be Authenticated for even Read-Access then add this line exact below AuthUserFile
Require valid-user
save & exit from File.

Restart Apache Service :-
sudo /etc/init.d/apache2 restart