Howto: Installing HP LaserJet M1005 MFP Printer on Linux | CentOS | Fedora | RHEL | Ubuntu

Hello,

Today I am sharing some printer related things. By Following this how to you will able to use HP LaserJet M1005 MFP into Linux.

Few days ago I buy a HP printer ( LaserJet M1005 MFP) and I faced the issue to configure in Linux as there were no Default drivers, So this howto is for them who wants to use Printer HP LaserJet M1005 MFP from Linux.

As my all post i will warn you to do this at your own risk.

So lets start with the procedure.

Please perform Following steps to Install HP LaserJet M1005 MFP on Linux | Fedora | Ubuntu | RHEL

1) Please become root to perform this steps

2) First of All You need to download Drivers for HPLaserJet M1005 MFP, Execute Following Command :-

wget -O foo2zjs.tar.gz http://foo2zjs.rkkda.com/foo2zjs.tar.gz

3) Extract File which you download, Execute Following command :-

[root@tejas-barot-linux-ahmedabad ~]# tar zvxf foo2zjs.tar.gz

4) Once you are done with Extract, Please change your directory to “foo2zjs”
[root@tejas-barot-linux-ahmedabad ~]# cd foo2zjs

5) Now Execute Following Command to compile :-

[root@tejas-barot-linux-ahmedabad foo2zjs]# make

6) Once you get a prompt after executing above command successfully, Execute following command for HPLaserjet M1005 MFP :-

[root@tejas-barot-linux-ahmedabad foo2zjs]# ./getweb P1007

7) Now Execute Following Command to Install Drivers :-

[root@tejas-barot-linux-ahmedabad foo2zjs]# make install

8) Once It is done successfully, If you want to execute some optional commands then Execute Following ( Its not compulsory, Its Optional ) :-

— To Configure with Hotplug

[root@tejas-barot-linux-ahmedabad foo2zjs]# make install-hotplug

— For Cups Compatible

[root@tejas-barot-linux-ahmedabad foo2zjs]# make cups

9) Cups users execute Following Command :-

[root@tejas-barot-linux-ahmedabad ~]# /etc/init.d/cups restart

10) That’s All. Now You can configure your printer through “system-config-printer”

I hope this will helps you all.

If this works for your then Please Click Google +1 Button and Show Your Support. Your Support will encourage me to write more articles.

Enjoy HP LaserJet M1005 MFP Printer on Linux :) Enjoy Open Source :) Enjoy Linux :)

####

Tejas Barot’s Latest Linux Quote :-

“Now-a-days, Life and than after Time is Most Important, Then why to invest both in WinowsZ and Viruses ??? Invest Valuable Life and Time in Linux, Use Linux and Open Source” – Tejas Barot

For More Linux quotes by Tejas Barot please visit :- http://goo.gl/h9E7q

####

Howto: Installing HP LaserJet P1007 Printer on Linux | CentOS | Fedora | RHEL | Ubuntu

Hello,

Today I am sharing some printer related things. By Following this how to you will able to use HP LaserJet P1007 into Linux.

Few days ago I buy a HP printer ( LaserJet P1007) and I faced the issue to configure in Linux as there were no Default drivers, So this howto is for them who wants to use Printer HP LaserJet P1007 from Linux.

As my all post i will warn you to do this at your own risk.

So lets start with the procedure.

Please perform Following steps to Install HP LaserJet P1007 on Linux | Fedora | Ubuntu | RHEL

1) Please become root to perform this steps 

2) First of All You need to download Drivers for HPLaserJet P1007, Execute Following Command :-

wget -O foo2zjs.tar.gz http://foo2zjs.rkkda.com/foo2zjs.tar.gz

3) Extract File which you download, Execute Following command :-

[root@tejas-barot-linux-ahmedabad ~]# tar zvxf foo2zjs.tar.gz

4) Once you are done with Extract, Please change your directory to “foo2zjs”
[root@tejas-barot-linux-ahmedabad ~]# cd foo2zjs

5) Now Execute Following Command to compile :-

[root@tejas-barot-linux-ahmedabad foo2zjs]# make

6) Once you get a prompt after executing above command successfully, Execute following command for HPLaserjet P1007 :-

[root@tejas-barot-linux-ahmedabad foo2zjs]# ./getweb P1007

7) Now Execute Following Command to Install Drivers :-

[root@tejas-barot-linux-ahmedabad foo2zjs]# make install

8) Once It is done successfully, If you want to execute some optional commands then Execute Following ( Its not compulsory, Its Optional ) :-

— To Configure with Hotplug

[root@tejas-barot-linux-ahmedabad foo2zjs]# make install-hotplug

— For Cups Compatible

[root@tejas-barot-linux-ahmedabad foo2zjs]# make cups

9) Cups users execute Following Command :-

[root@tejas-barot-linux-ahmedabad ~]# /etc/init.d/cups restart

10) That’s All. Now You can configure your printer through “system-config-printer”

I hope this will helps you all.

If this works for your then Please Click Google +1 Button and Show Your Support. Your Support will encourage me to write more articles.

Enjoy Google Chrome as root :) Enjoy Open Source :) Enjoy Linux :)

####

Tejas Barot’s Latest Linux Quote :-

“There were so many viruses waiting outside of Computer Room,
I opened door,They came and went out very sadly, Because they didn’t find WindowZ,
Feel Protected, Be Protected, Use Linux and Open Source” – 
Tejas Barot

For More Linux quotes by Tejas Barot please visit :- http://goo.gl/xb0nZ

####

Installing HP LaserJet M1319f MFP Printer

Hi Friends,
I Managed to Install HP Multifunction Printer on Fedora 9/10 Linux.

Printer Model Number :- HP LaserJet M1319f MFP.
Follow this Steps to Setup your Printer on Fedora 9/10, Ubuntu 8.04, Ubuntu 8.04.

Step 1 :- Download HPLIP Driver from Website.
http://hplipopensource.com/hplip-web/index.html

Step 2 :- Once Download Finished.Execute Following Command as a root.]$ su – root

Password:

[root@tejasbarot.com]# sh Desktop/hplip-2.8.12.run

Creating directory hplip-2.8.12

Verifying archive integrity… All good.

Uncompressing HPLIP 2.8.12 Self Extracting Archive……………………………………………………..
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….

warning: hplip-install should not be run as root.

HP Linux Imaging and Printing System (ver. 2.8.12)

HPLIP Installer ver. 5.0

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP

This software comes with ABSOLUTELY NO WARRANTY.

This is free software, and you are welcome to distribute it

under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Tue-10-Feb-2009_17:44:37.log

error: You are running the installer as root. It is highly recommended that you run the installer as

error: a regular (non-root) user. Do you still wish to continue?

Continue with installation (y=yes, n=no*, q=quit) ? y

note: Defaults for each question are maked with a ‘*’. Press <enter> to accept the default.

INSTALLATION MODE

—————–

Automatic mode will install the full HPLIP solution with the most common options.

Custom mode allows you to chose installation options to fit specific requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) : a

Initializing. Please wait…

INTRODUCTION

————

This installer will install HPLIP version 2.8.12 on your computer.

Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).

DISTRO/OS CONFIRMATION

———————-

Distro appears to be Fedora 10.

Is “Fedora 10” your correct distro/OS and version (y=yes*, n=no, q=quit) ? y

SELECT HPLIP OPTIONS

——————–

Would you like to enable support for parallel (LPT:) connected printers? (y=yes, n=no*, q=quit) ? y

Parallel support enabled.

INSTALLATION NOTES

——————

SELinux must be disabled for HPLIP to function properly. Please disable SELinux before continuing.

Please read the installation notes. Press <enter> to continue or ‘q’ to quit: Press Enter

RUNNING PRE-INSTALL COMMANDS

—————————-

INSTALL MISSING REQUIRED DEPENDENCIES

————————————-

warning: There are 1 missing REQUIRED dependencies.

note: Installation of dependencies requires an active internet connection.

warning: Missing REQUIRED dependency: cups-devel (cups-devel- Common Unix Printing System development files)

INSTALL MISSING OPTIONAL DEPENDENCIES

————————————-

warning: There are 3 missing OPTIONAL dependencies.

note: Installation of dependencies requires an active internet connection.

warning: Missing REQUIRED dependency for option ‘network’: libnetsnmp-devel (libnetsnmp-devel – SNMP networking library development files)

warning: Missing REQUIRED dependency for option ‘gui’: pyqt (PyQt 3- Qt interface for Python (for Qt version 3.x))

warning: Missing REQUIRED dependency for option ‘scan’: sane-devel (SANE – Scanning library development files)

CHECKING FOR NETWORK CONNECTION

——————————-

Network connection present.

RUNNING PRE-PACKAGE COMMANDS

—————————-

su -c “yum clean all” (Pre-depend step 1)

DEPENDENCY AND CONFLICT RESOLUTION

———————————-

Running ‘su -c “yum -y -d 10 -e 1 install cups-devel”‘

Please wait, this may take several minutes…

Running ‘su -c “yum -y -d 10 -e 1 install net-snmp-devel”‘

Please wait, this may take several minutes…

Running ‘su -c “yum -y -d 10 -e 1 install PyQt”‘

Please wait, this may take several minutes…

Running ‘su -c “yum -y -d 10 -e 1 install sane-backends-devel”‘

Please wait, this may take several minutes…

RUNNING POST-PACKAGE COMMANDS

—————————–

RE-CHECKING DEPENDENCIES

————————

PRE-BUILD COMMANDS

——————

BUILD AND INSTALL

—————–

Running ‘./configure –with-drvdir=/usr/share/cups/drv/hp/ –with-hpppddir=/usr/share/cups/model/HP –prefix=/usr –disable-qt4 –disable-foomatic-ppd-install –enable-doc-build –enable-qt3 –enable-gui-build –enable-foomatic-drv-install –enable-pp-build –enable-network-build –enable-dbus-build –disable-hpijs-only-build –enable-scan-build –enable-fax-build’

Please wait, this may take several minutes…

Command completed successfully.

Running ‘make clean’

Please wait, this may take several minutes…

Command completed successfully.

Running ‘make’

Please wait, this may take several minutes…

Command completed successfully.

Running ‘make install’

Please wait, this may take several minutes…

Command completed successfully.

Build complete.

POST-BUILD COMMANDS

——————-

RESTART OR RE-PLUG IS REQUIRED

——————————

If you are installing a USB connected printer, and the printer was plugged in when you started this installer, you will need to either restart your PC or

unplug and re-plug in your printer (USB cable only). If you choose to restart, run this command after restarting: hp-setup (Note: If you are using a parallel

connection, you will have to restart your PC. If you are using network/wireless, you can ignore and continue).

Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) : i

step 3. [root@tejasbarot.com]# hp-plugin

After executing this command one window will open then select Download and Install -> Click on I accept the terms of the license (Read the Terms and Condition Then only Accept) then Click on Install Plugin.

That’s You HP M1319f Multi-Function Printer Installed.

Follow Below steps to Scan your Document on HP M1319f MFP

If you want to scan document. Then Load Document On Printer then go to ->

Click on Applications -> Graphics -> Scanner Tool

Click on Scan to scan document.

If you not get any error while scanning and you are able to see your scanned document clearly. then enjoy Scanning you scanner works…

Bold (Highlighted) Lines are most Important.

Dont forget to comment.All comments accepted.

Enjoy Printing, Scanning……. 🙂