Installing HP LaserJet M1319f MFP Printer

Hi Friends,
I Managed to Install HP Multifunction Printer on Fedora 9/10 Linux.

Printer Model Number :- HP LaserJet M1319f MFP.
Follow this Steps to Setup your Printer on Fedora 9/10, Ubuntu 8.04, Ubuntu 8.04.

Step 1 :- Download HPLIP Driver from Website.
http://hplipopensource.com/hplip-web/index.html

Step 2 :- Once Download Finished.Execute Following Command as a root.]$ su – root

Password:

[root@tejasbarot.com]# sh Desktop/hplip-2.8.12.run

Creating directory hplip-2.8.12

Verifying archive integrity… All good.

Uncompressing HPLIP 2.8.12 Self Extracting Archive……………………………………………………..
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….

warning: hplip-install should not be run as root.

HP Linux Imaging and Printing System (ver. 2.8.12)

HPLIP Installer ver. 5.0

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP

This software comes with ABSOLUTELY NO WARRANTY.

This is free software, and you are welcome to distribute it

under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Tue-10-Feb-2009_17:44:37.log

error: You are running the installer as root. It is highly recommended that you run the installer as

error: a regular (non-root) user. Do you still wish to continue?

Continue with installation (y=yes, n=no*, q=quit) ? y

note: Defaults for each question are maked with a ‘*’. Press <enter> to accept the default.

INSTALLATION MODE

—————–

Automatic mode will install the full HPLIP solution with the most common options.

Custom mode allows you to chose installation options to fit specific requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) : a

Initializing. Please wait…

INTRODUCTION

————

This installer will install HPLIP version 2.8.12 on your computer.

Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).

DISTRO/OS CONFIRMATION

———————-

Distro appears to be Fedora 10.

Is “Fedora 10” your correct distro/OS and version (y=yes*, n=no, q=quit) ? y

SELECT HPLIP OPTIONS

——————–

Would you like to enable support for parallel (LPT:) connected printers? (y=yes, n=no*, q=quit) ? y

Parallel support enabled.

INSTALLATION NOTES

——————

SELinux must be disabled for HPLIP to function properly. Please disable SELinux before continuing.

Please read the installation notes. Press <enter> to continue or ‘q’ to quit: Press Enter

RUNNING PRE-INSTALL COMMANDS

—————————-

INSTALL MISSING REQUIRED DEPENDENCIES

————————————-

warning: There are 1 missing REQUIRED dependencies.

note: Installation of dependencies requires an active internet connection.

warning: Missing REQUIRED dependency: cups-devel (cups-devel- Common Unix Printing System development files)

INSTALL MISSING OPTIONAL DEPENDENCIES

————————————-

warning: There are 3 missing OPTIONAL dependencies.

note: Installation of dependencies requires an active internet connection.

warning: Missing REQUIRED dependency for option ‘network’: libnetsnmp-devel (libnetsnmp-devel – SNMP networking library development files)

warning: Missing REQUIRED dependency for option ‘gui’: pyqt (PyQt 3- Qt interface for Python (for Qt version 3.x))

warning: Missing REQUIRED dependency for option ‘scan’: sane-devel (SANE – Scanning library development files)

CHECKING FOR NETWORK CONNECTION

——————————-

Network connection present.

RUNNING PRE-PACKAGE COMMANDS

—————————-

su -c “yum clean all” (Pre-depend step 1)

DEPENDENCY AND CONFLICT RESOLUTION

———————————-

Running ‘su -c “yum -y -d 10 -e 1 install cups-devel”‘

Please wait, this may take several minutes…

Running ‘su -c “yum -y -d 10 -e 1 install net-snmp-devel”‘

Please wait, this may take several minutes…

Running ‘su -c “yum -y -d 10 -e 1 install PyQt”‘

Please wait, this may take several minutes…

Running ‘su -c “yum -y -d 10 -e 1 install sane-backends-devel”‘

Please wait, this may take several minutes…

RUNNING POST-PACKAGE COMMANDS

—————————–

RE-CHECKING DEPENDENCIES

————————

PRE-BUILD COMMANDS

——————

BUILD AND INSTALL

—————–

Running ‘./configure –with-drvdir=/usr/share/cups/drv/hp/ –with-hpppddir=/usr/share/cups/model/HP –prefix=/usr –disable-qt4 –disable-foomatic-ppd-install –enable-doc-build –enable-qt3 –enable-gui-build –enable-foomatic-drv-install –enable-pp-build –enable-network-build –enable-dbus-build –disable-hpijs-only-build –enable-scan-build –enable-fax-build’

Please wait, this may take several minutes…

Command completed successfully.

Running ‘make clean’

Please wait, this may take several minutes…

Command completed successfully.

Running ‘make’

Please wait, this may take several minutes…

Command completed successfully.

Running ‘make install’

Please wait, this may take several minutes…

Command completed successfully.

Build complete.

POST-BUILD COMMANDS

——————-

RESTART OR RE-PLUG IS REQUIRED

——————————

If you are installing a USB connected printer, and the printer was plugged in when you started this installer, you will need to either restart your PC or

unplug and re-plug in your printer (USB cable only). If you choose to restart, run this command after restarting: hp-setup (Note: If you are using a parallel

connection, you will have to restart your PC. If you are using network/wireless, you can ignore and continue).

Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) : i

step 3. [root@tejasbarot.com]# hp-plugin

After executing this command one window will open then select Download and Install -> Click on I accept the terms of the license (Read the Terms and Condition Then only Accept) then Click on Install Plugin.

That’s You HP M1319f Multi-Function Printer Installed.

Follow Below steps to Scan your Document on HP M1319f MFP

If you want to scan document. Then Load Document On Printer then go to ->

Click on Applications -> Graphics -> Scanner Tool

Click on Scan to scan document.

If you not get any error while scanning and you are able to see your scanned document clearly. then enjoy Scanning you scanner works…

Bold (Highlighted) Lines are most Important.

Dont forget to comment.All comments accepted.

Enjoy Printing, Scanning……. 🙂

Installing HP Color LaserJet 5550dn on RHEL,Fedora9/10 Linux

Hi Friends,

If any one looking for Installation of HP Color LaserJet 5550dn on RHEL and Fedora 9/10 Linux Follow this method :-

Open this link :- http://hplipopensource.com/hplip-web/supported_devices/index.html

In First Step Select Color LaserJet/ Color LaserJet MFP

In Second Step Select HP 5550dn

In Third Step Click on Continue

That will take you to the downloading page
Click on Download HPLIP It will take you to the installation Information page Scroll Down and again click on Downlaod HPLIP

save file and remember locate where you saved it.

Once Download Complete Go to that location where you Download it and execute following command : (You need to be root to install this)

[root@tejasbarot.com]# sh hplip-3.9.2.run

Just Follow the Instruction and Your Printer get Installed.
Hope this works for you 🙂

Enjoy Printing 🙂

Enjoy Linux:)

All Comments Accepted.

Installing HP LaserJet 1020 on Redhat,Fedora 9/10.

Hi Friends,
If you have Printer HP LaserJet 1020 and if you are getting trouble to install on Redhat, Fedora 9/10 then follow this method your Printer will work perfectly :-

For Installing Printer using this method GCC packages is must.
yum -y install gcc*

Step 1:- Execute Following Command
wget -O foo2zjs.tar.gz http://foo2zjs.rkkda.com/foo2zjs.tar.gz
This command will download Driver

Step 2 :- Unpack the downloaded Drivers.Execute Following Commands
tar zxvf foo2zjs.tar.gz
cd foo2zjs

Step 3:- Now Compile Drivers & Install Drivers (GCC Packages need here now)
[root@tejasbarot.com~]# make
[root@tejasbarot.com~]# make install
[root@tejasbarot.com~]# make install-hotplug
(this command will detect your USB printer)

When you finished this then follow below steps :-

Execute system-config-printer command
Find your Printer and Install it.

Get extra files from the web like Firm ware and ICM File.Select your Printer and download it.
$ ./getweb 2430 # Get Minolta 2430 DL .ICM files
$ ./getweb 2300 # Get Minolta 2300 DL .ICM files
$ ./getweb 2200 # Get Minolta 2200 DL .ICM files
$ ./getweb cpwl # Get Minolta Color PageWorks/Pro L .ICM files
$ ./getweb 1020 # Get HP LaserJet 1020 firmware file
$ ./getweb 1018 # Get HP LaserJet 1018 firmware file
$ ./getweb 1005 # Get HP LaserJet 1005 firmware file
$ ./getweb 1000 # Get HP LaserJet 1000 firmware file

Enjoy printing on HP LaserJet 1020 🙂