ShellShock Bug: Check / Identify / Solve Vulnerability

Hello,

Patch your bash now Just heard that your shell / bash may be vulnerable or buggy.

This post will help you to check whether your Shell / bash of Red Hat Enterprise Linux is vulnerable / Bug infected or not.

How does this impact systems

This issue affects all products which use the Bash shell and parse values of environment variables. This issue is especially dangerous as there are many possible ways Bash can be called by an application. Quite often if an application executes another binary, Bash is invoked to accomplish this. Because of the pervasive use of the Bash shell, this issue is quite serious and should be treated as such.

All versions prior to those listed as updates for this issue are vulnerable to some degree.

See the appropriate remediation article for specifics.

The patch for CVE-2014-7169 introduces changes to how Bash evaluates environment variables. Applications which directly create Bash functions as environment variables need to be made aware of these changes. Previously, a function had to be stored in an environment variable of the same name. For example, the function “compute” would be stored in an environment variable named “compute”. With the patch for CVE-2014-7169 applied, it would need to use the name “BASH_FUNC_compute()”. As a result, there are now two pairs of parentheses in the environment string, as in “BASH_FUNC_compute()=() { }”.

Functions written in Bash itself do not need to be changed, even if they are exported with “export -f”. Bash will transparently apply the appropriate naming when exporting, and reverse the process when importing function definitions.

 

ShellShock
ShellShock

Execute following command to check whether your bash / shell is bug infected or vulnerable!

So, how do you know if your servers can be attacked? First, you need to check to see if you’re running a vulnerable version of Bash. To do that, run the following command from a Bash shell:

env x='() { :;}; echo vulnerable' bash -c "echo this is a test"

If you get the result:

vulnerable
this is a test

Bad news, your version of Bash can be hacked. If you see:

bash: warning: x: ignoring function definition attempt bash: error importing function definition for `x’ this is a test

You’re good. Well, to be more exact, you’re as protected as you can be at the moment.

OR

To test if your version of Bash is vulnerable to CVE-2014-6271, run the following command:

$ env 'x=() { :;}; echo vulnerable' 'BASH_FUNC_x()=() { :;}; echo vulnerable' bash -c "echo test"

If the output of the above command contains a line containing only the word vulnerable you are using a vulnerable version of Bash. The patch used to fix this issue ensures that no code is allowed after the end of a Bash function.

Note that different Bash versions will also print different warnings while executing the above command. The Bash versions without any fix produce the following output:

$ env 'x=() { :;}; echo vulnerable' 'BASH_FUNC_x()=() { :;}; echo vulnerable' bash -c "echo test"
vulnerable
bash: BASH_FUNC_x(): line 0: syntax error near unexpected token `)'
bash: BASH_FUNC_x(): line 0: `BASH_FUNC_x() () { :;}; echo vulnerable'
bash: error importing function definition for `BASH_FUNC_x'
test

The versions with only the original CVE-2014-6271 fix applied produce the following output:

$ env 'x=() { :;}; echo vulnerable' 'BASH_FUNC_x()=() { :;}; echo vulnerable' bash -c "echo test"
bash: warning: x: ignoring function definition attempt
bash: error importing function definition for `x'
bash: error importing function definition for `BASH_FUNC_x()'
test

Read more :- https://access.redhat.com/articles/1200223

Products Affected:

Product/Channel Fixed in package Remediation details
Red Hat Enterprise Linux 7 bash-4.2.45-5.el7_0.4 Red Hat Enterprise Linux
Red Hat Enterprise Linux 6 bash-4.1.2-15.el6_5.2 Red Hat Enterprise Linux
bash-4.1.2-15.el6_5.1.sjis.1 * Red Hat Enterprise Linux
bash-4.1.2-9.el6_2.1 * Red Hat Enterprise Linux 6.2 AUS
bash-4.1.2-15.el6_4.1 * Red Hat Enterprise Linux 6.4 EUS
Red Hat Enterprise Linux 5 bash-3.2-33.el5_11.4 Red Hat Enterprise Linux
bash-3.2-33.el5_11.1.sjis.1 * Red Hat Enterprise Linux
bash-3.2-24.el5_6.1 * Red Hat Enterprise Linux 5.6 LL
bash-3.2-32.el5_9.2 * Red Hat Enterprise Linux 5.9 EUS
Red Hat Enterprise Linux 4 bash-3.0-27.el4.2 * Red Hat Enterprise Linux 4 ELS

If you are using any other version of Linux, Check and Patch it now before its too late!!

References taken from :

https://access.redhat.com/announcements/1210053
https://access.redhat.com/security/cve/CVE-2014-6271
Resolution: https://access.redhat.com/node/1207723

Be Safe 🙂 Be Secure 🙂 Enjoy Linux 🙂 Enjoy Open Source

Please Keep in Touch with Social Networking :- 
Facebook Page :- https://www.facebook.com/AllLinuxUsersBlog

Howto: Install TeamViewer 8 on Linux | RHEL | CentOS | Ubuntu | Fedora

Hello,

TeamViewer 8 Beta Has been Released for Linux.

You Can Perform this Article on RHEL 6.x / CentOS 6.x / Ubuntu 12.10 / Fedora for 32-bit and x86_64 bit architectures. This article is tested on RHEL 6.x / CentOS 6.x / Ubuntu 12.10 32-Bit Architecture should work on 64-Bit Architecture too.

This Article will show you TeamViewer 8  Installation Step by Step.

You have to download Latest Package for TeamViewer 8 and Perform Installation.

Perform Following Steps to Install TeamViewer 8 Beta on RHEL / CENTOS / Ubuntu :-

1. You need “root” or “sudo” rights for Package Installation.

2. For RHEL 6 / Fedora / CentOS 6 Execute Following Command :- 

[root@linux-support-ahmedabad ~]# wget -c http://www.teamviewer.com/download/teamviewer_linux.rpm

[root@linux-support-ahmedabad ~]# rpm -Uvh teamviewer_linux.rpm

3. For Ubuntu Execute Following Command :- 

For 32-Bit Arch :- 

[root@linux-support-ahmedabad ~]# wget -c http://www.teamviewer.com/download/version_8x/teamviewer_linux.deb

[root@linux-support-ahmedabad ~]# dpkg -i teamviewer_linux.deb

For 64-Bit Arch :- 

[root@linux-support-ahmedabad ~]# wget -c http://www.teamviewer.com/download/version_8x/teamviewer_linux_x64.deb

[root@linux-support-ahmedabad ~]# dpkg -i teamviewer_linux_x64.deb

4. It’s Done. Now You can Execute command “teamviewer” on Terminal OR You can find TeamViewer 8 into Application -> Internet -> TeamViewer 8.

5. Enjoy TeamViewer 8.

In TeamViewer 8, TeamViewer now works on Daemon So, If you got following error

“TeamViewer Daemon is not Running
Please start teamviewerd and then restart TeamViewer”

Then Execute Following command :- /opt/teamviewer8/tv_bin/teamviewerd and again Try to open teamviewer it will work.

Hope this helps you all.

If this works for your then Please Click Google +1 Button and Show Your Support. Your Support will encourage me to write more articles.

If Any Errors in this How to then comment down below.

All Linux User’s Blog Mobile Applications :- http://www.tejasbarot.com/download-mobile-apps/

Enjoy TeamViewer8 on Linux :) Enjoy Linux :) Enjoy Open Source :)

HOWTO: Install Squirrelmail on Linux | RHEL 6 | CentOS 6 | Ubuntu | 32-Bit | 64-Bit | x86_64

Hello,

SquirrelMail is an Open Source project that provides both a web-based email application and an IMAP proxy server.

The webmail portion of the project was started by Nathan and Luke Ehresman in 1999 and is written in the PHP scripting language. It can be installed on almost all web servers as long as PHP is present and the web server has access to an IMAP and SMTP server.

SquirrelMail webmail outputs valid HTML 4.0 for its presentation, making it compatible with a majority of current web browsers. SquirrelMail webmail uses a plugin architecture to accommodate additional features around the core application, and over 200 plugins are available on the SquirrelMail website

To Read More about Squirrelmail :- http://en.wikipedia.org/wiki/SquirrelMail

Squirrelmail is one of the best Web Mail which is available for Linux.

Squirrelmail is very famous and easy to use and Squirrelmail is completely Free and Open Source.

You can easily send/receive e-mails using this squirrelmail. This Article will show you steps to install Webmail on RHEL 6 / CentOS 632-bit and 64-Bit and Ubuntu.

Installing Squirrelmail on Red Hat Enterprise Linux 6 .CentOS 6 and Ubuntu  is very easy only just few Steps and you are done.

Please perform following steps to Install Squirrelmail on RHEL / CentOS 6 32-bit and 64-Bit ( X86_64 ) :-

1. You need to be root to Install RPM Packages.

2. Install EPEL Repository for RHEL / CentOS 6.x :-

For 32-Bit and 64-Bit (x86_64) :-

[root@tejas-barot-ahmedabad-linux ~]# wget http://tejasbarot.com/RPMs/epel-release-6-7.noarch.rpm

If you Want to Download Via Browser You can click on Above Link.

3. Execute Following command to install php-mbstring Package for Squirrelmail.

Package php-mbstring for RHEL 6.x / CentOS 6.x :-

For 32-Bit :-

[root@tejas-barot-ahmedabad-linux ~]# wget http://tejasbarot.com/RPMs/php-mbstring-5.3.3-3.el6_2.8.i686.rpm

If you want to Download Via Browser You can click on Above Link.

For 64-Bit ( X86_64) :-

[root@tejas-barot-ahmedabad-linux ~]# wget http://tejasbarot.com/RPMs/php-mbstring-5.3.3-3.el6_2.8.x86_64.rpm

If you want to Download Via Browser You can click on Above Link.

4. Now Execute Following command to Install SquirrelMail :-

[root@tejas-barot-ahmedabad-linux ~]# yum install squirrelmail

5. Once above command execute successfully please restart webserver.

[root@tejas-barot-ahmedabad-linux ~]# service httpd restart

6. To Open SquirrelMail. Point your browser to <your-ip-address>/webmail

7. That’s it. It is now done for RHEL / CentOS 6.x 32-Bit and 64-Bit (x86_64)

Please perform following steps to Install Squirrelmail on Ubuntu :-

1. You need to be root access via sudo or direct.

2. sudo apt-get install squirrelmail

3. Once above command execute successfully please restart webserver.

[root@tejas-barot-ahmedabad-linux ~]# service httpd restart

4. To Open SquirrelMail. Point your browser to <your-ip-address>/webmail

5. That’s it. It is now done for Ubuntu. Its very easy to install on Ubuntu.

Note :- On Ubuntu, I have tested only once so it is possible you might get some issues / difficulties, Please post comment if you have difficulties for any issues with this howto.

If this works for your then Please Click Google +1 Button and Show Your Support. Your Support will encourage me to write more articles.

Enjoy Webmail on Linux 🙂 Enjoy SquirrelMail 🙂 Enjoy Linux 🙂 Enjoy Open Source 🙂

Howto: Installing WINE on RHEL / CentOS 5.x / 6.x | 32-bit | 64-bit | x86_64 | Linux

Hello All,

There are so many request from blog visitors to write Article on Wine Installation. Thanks for your request.

This article is for Install Wine on CentOS and RHEL 5.x and 6.x easily. Actually i have planned this article through script but due to shortage of time and now a days busy too, So Couldn’t implement complete script so Demonstrating manual how to over here.

I hope you guys will like the same.

Like VLC installation on Red Hat Enterprise Linux 5.x and 6.x and CentOS 5.x and 6.x its bit complicated and So much dependencies issues are there. So To make installation a bit easier and without too much headache i am writing this article.

This HOWTO performed on Blank RHEL / CentOS 5.x and 6.x if you are running with Latest or OLD RPMs you might face issue of Dependencies. Do it at your own risk wherever you are performing this howto.

To Install WINE on RHEL/CentOS 5.x and 6.x, Perform following Howto.

For RHEL / CentOS 6 32-Bit and 64-Bit (x86_64) :-

1. You need to be root to perform rest steps.

2. This step is must otherwise you might face dependencies issues. Now Lets take a backup of your Original Repository. By Executing Following Command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mkdir /repobackup
[root@wine-on-linux-ahmedabad-tejas-barot ~]#mv /etc/yum.repos.d/*.repo /repobackup/

3. Now Clean Previously Cached Repository by Executing Following command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum clean all

4. Now Download and Install EPEL and Tejas Barot’s RPM for Wine to Install Wine on RHEL / CentOS 6.x.

To Download RPMs :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# cd /tmp
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# wget http://www.tejasbarot.com/RPMs/epel-release-6-7.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# wget http://www.tejasbarot.com/RPMs/wine-install-tejas-barot-2.0-2.noarch.rpm

To Install RPMs :-

[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force epel-release-6-7.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force wine-install-tejas-barot-2.0-2.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# cd

5. To install wine and its Packages execute following command :-

[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum install –nogpgcheck wine*

When it ask for”YES”and”NO”Please go ahead with your choice.

6. That’s it, You are done now. Wine Installed Successfully.

7. Now Revert your previous repositories. by Following commands
[root@wine-on-linux-ahmedabad-tejas-barot ~]# rm -rf /etc/yum.repos.d/*.repo
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mv /repobackup/*.repo /etc/yum.repos.d/

8. That’s It now. You have installed wine on RHEL / CentOS 6x Successfully and Your Previous Repositories also reverted back.

For RHEL / CentOS 5.x 32-Bit and 64-Bit (x86_64) :-

1. You need to be root to perform rest steps.

2. This step is must otherwise you might face dependencies issues. Now Lets take a backup of your Original Repository. By Executing Following Command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mkdir /repobackup
[root@wine-on-linux-ahmedabad-tejas-barot ~]#mv /etc/yum.repos.d/*.repo /repobackup/

3. Now Clean Previously Cached Repository by Executing Following command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum clean all

4. Now Download and Install EPEL and Tejas Barot’s RPM for Wine to Install Wine on RHEL / CentOS 5.x.

To Download RPMs :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# cd /tmp
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# wget http://www.tejasbarot.com/RPMs/epel-release-5-4.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]#wget http://www.tejasbarot.com/RPMs/wine-install-tejas-barot-1.0-1.noarch.rpm

To Install RPMs :-

[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force epel-release-5-4.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force wine-install-tejas-barot-1.0-1.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# cd

5. To install wine and its Packages execute following command :-

[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum install –nogpgcheck wine*

When it ask for”YES”and”NO”Please go ahead with your choice.

6. That’s it, You are done now. Wine Installed Successfully.

7. Now Revert your previous repositories. by Following commands
[root@wine-on-linux-ahmedabad-tejas-barot ~]# rm -rf /etc/yum.repos.d/*.repo
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mv /repobackup/*.repo /etc/yum.repos.d/

8. That’s It now. You have installed wine on RHEL / CentOS 5.x Successfully and Your Previous Repositories also reverted back.

Hope this will helps you, Waiting for your feedback.

If you like this then Please Click Google +1 Button and Show Your Support. Your Support will encourage me to write more articles.

All Linux User’s Blog Mobile Applications :- http://www.tejasbarot.com/download-mobile-apps/

Enjoy Wine on Red Hat Enterprise Linux and CentOS 5.x and 6.x 🙂 Enjoy Linux 🙂 Enjoy Open Source 🙂

Howto: Remove Duplicate Messages/E-Mails from IMAP/POP | Linux Desktop E-Mail Client | Thunderbird

Hello,

This post is some what different from my other posts. This is Regarding Most Famous E-Mail Client in Linux. Thunderbird.

Thunderbird is very famous Desktop E-Mail client in Linux, and Most of the Linux User’s Uses the most. I like about thunderbird is that it got very easy interface to use and Most thing which i like is very nice Extensions are available for Thunderbird.

Today I am going to demonstrate one Extension from Thunderbird which might helps you some where.

A few days back, I got issue of Duplicate emails and I received so many duplicate e-mails to my INBOX. and I was just thinking that How do i delete those emails and Just One Search inside Thunderbird Extensions Page solved my issue.

DO IT AT YOUR OWN RISK.

I am so much impressed with the Extensions and thought to share this may it helps to those who stuck with DUPLICATE emails.

Just Install One Thunderbird Extension to Remove Duplicate Emails and Your Issue solved.

Mozilla Thunderbird Version:- 13.0.1

Extension Name :- Remove Duplicate Messages (Alternate)

Version :- 0.3.7

I don’t say above requirement is must but it worked successfully for Above Versions.

To Install this Extension, Please go through Following Instructions. 

1) Open Mozilla Thunderbird

2) Click on Tools -> Add-ons

3) Click on Get Add-Ons 

4) On Right Side Search Bar, Type Remove Duplicate Messages (Alternate)

Remove Duplicate Messages POP/IMAP
Thunderbird Remove Duplicate Messages

5) Click on Found Result and Click on INSTALL.

6) Once Installation Complete Successfully, Restart your Mozilla Thunderbird 

7) To Verify Installation, Right Click on INBOX or Any E-Mail Folders You will see Remove Duplicates…. . Have a look at Below Screen shot.

Remove Duplicate E-Mails - Thunderbird
Remove Duplicates – Thunderbird

 

8) That’s IT. Done. Now You can Easily Search and Remove Duplicate emails.

Hope this will helps you all. Please Comment any Issue/Feedback.

If this works for your then Please Click Google +1 Button and Show Your Support. Your Support will encourage me to write more articles.

All Linux User’s Blog Mobile Applications :- http://www.tejasbarot.com/download-mobile-apps/

Enjoy Mozilla Thunderbird 🙂 Remove Duplicate E-Mails from POP/IMAP Account 🙂 Enjoy Open Source 🙂 Enjoy Linux 🙂

Howto: Install Adobe Flash Player on 64-Bit ( x86_64) Linux | RHEL 6.x | CentOS 6.x

Hello,

This post will show you that How to Install Adobe Flash Player on Linux 64-Bit Architecture for RHEL ( Red Hat Enterprise Linux )6.x and CentOS 6.x.

In This Post Adobe Flash Player Version is :- 11.1.102.55

Previously Adobe Flash Player was available in BETA version, So At that time you have to download .tar.gz file and then you have to copy/paste it manually to Plugin Directory. In This post we will install it using RPM as release is available.

I have tested this Adobe Flash Player on RHEL 6.1.

DO IT AT YOUR OWN RISK.

To Install Adobe Flash Player on RHEL/CentOS 6.x, Please Follow below method :-

1) Close Your FireFox Before Following any step.

2) You have to be root  to perform this Howto.
[linux-ahmedabad@tejas-barot-linux-ahmedabad ~]$ su –

3) Now Download Adobe Flash Player 11.1.102.55 as per your preferred Method :-
Method 1:-

To Download it Via Firefox Just Click Here :-

http://fpdownload.macromedia.com/get/flashplayer/pdc/11.1.102.55/flash-plugin-11.1.102.55-release.x86_64.rpm

Method 2:-

To Download it from Command-Line Execute Following Command :-

[root@tejas-barot-linux-ahmedabad ~]# wget http://fpdownload.macromedia.com/get/flashplayer/pdc/11.1.102.55/flash-plugin-11.1.102.55-release.x86_64.rpm

4) Now Change your Directory Where you have download Adobe Flash Player RPM :-

5) Now Execute Following Command to Install Adobe Flash Player :-

[root@tejas-barot-linux-ahmedabad ~]# rpm -Uvh flash-plugin-11.1.102.55-release.x86_64.rpm

6) Now Open Firefox and check websites like For Example :- www.youtube.com

Provided Link is from Adobe, So If link doesn’t work or If you face any difficulties then please let me know by comment or sending me an e-mail, Mail Subject Must be “Flash Player on x86_64” otherwise mail will be ignored.

Please Click on Google +1 button and Add your ratings if this works for you and you like it.

Enjoy Ubuntu 11.10 Oneiric Ocelot :) Enjoy Ubuntu  :) Enjoy Open Source :) Enjoy Linux :)

All Linux User’s Blog Mobile Applications :- http://www.tejasbarot.com/download-mobile-apps/

Enjoy Flash Player on x86_64 🙂  Enjoy Firefox 🙂 Enjoy Linux 🙂 Enjoy Open Source 🙂

Howto:Installing TataPhoton+ on RHEL 6 | Linux

Hello,

I am sharing a howto cum good news for All Linux Users who specially use RHEL from Long time.

As in my earlier post for RHEL 6 Views i have mentioned that RHEL 6 is looks like a Fedora 14 from Graphical Point of View, but 1 positive thing which i like about RHEL 6 is that It is detecting most of the things automatically like fedora 14.

Today I am sharing how to to configure TataPhoton+ on RHEL 6 ( Red Hat Enterprise Linux 6).

If you are some what experienced then you will know it very easily but this how to is specially them who just started with RHEL 6 only and wanted to configure Data Card Photon+ on RHEL 6.

To Configure TataPhoton+ on RHEL6, You don’t require any RPM Sort of things but to Perform this howto following requirement must match.

Requirements :-

1) Network Manager must be installed.

2) You Network Must be managed by NetworkManager

To Configure and Running DataCard ( Photon+) On RHEL 6, please perform following steps.

1) Attach Tata Photon+ and Wait for 2 Mins mean while you can check that into for detecting process (/var/log/messages)
2) You will get a New Connection Called “New Mobile Broad Connection” click on that.
3) Click “Forward”
4) In Country Selection Select “India”, Click on Forward
5) Then Select “Tata Photon+”
6) Click on Finish
7) Now Left Click on NetworkManager there you will able to See connection name called “TATA Photon Mobile Broadband” click on that Connection.
8) That’s it, Now you are connected with TataPhon+  on RHEL 6.

Let me have some feedback on the same.

Enjoy Internet on Linux through DataCard Photon+ 🙂 Enjoy Linux 🙂 Enjoy Open Source 🙂 Enjoy Red Hat Enterprise Linux 6 🙂

Download CentOS 6.0 ISO | 32 & 64 Bit

Hello,

Finally CentOS 6 Final Version is now released and Available to Download.

Its Good News for all RHEL users who likes to Use its Clone But right now we don’t know how much stable it is and how exactly it matches RHEL 6.

We are pleased to announce the immediate availability of CentOS 6.0 for i386 and x86_64 architectures. CentOS 6.0 is based on the upstream release EL 6.0 and includes packages from all variants. All upstream repositories have been combined into one, to make it easier for end users to work with. Since upstream has a 6.1 version already released, we will be using a Continuous Release repository for 6.0 to bring all 6.1 and post 6.1 security updates to all 6.0 users, till such time as CentOS 6.1 is released

Now Downloads for CentOS 6 is available, You can download it from following links, Let me know if you face any errors so i will provide some other links too.

Release Notes :- http://wiki.centos.org/Manuals/ReleaseNotes/CentOS6.0

Download CentOS 6 (32bit) :- http://mirror.its.sfu.ca/mirror/CentOS/6/isos/i386/CentOS-6.0-i386-bin-DVD.iso

Download CeontOS 6 (64bit) DVD1 :- http://mirror.its.sfu.ca/mirror/CentOS/6/isos/x86_64/CentOS-6.0-x86_64-bin-DVD1.iso

Download CeontOS 6 (64bit) DVD2 :- http://mirror.its.sfu.ca/mirror/CentOS/6/isos/x86_64/CentOS-6.0-x86_64-bin-DVD2.iso

We are pleased to announce the immediate availability of CentOS 6.0 for i386 and x86_64 architectures. CentOS 6.0 is based on the upstream release EL 6.0 and includes packages from all variants. All upstream repositories have been combined into one, to make it easier for end users to work with. Since upstream has a 6.1 version already released, we will be using a Continuous Release repository for 6.0 to bring all 6.1 and post 6.1 security updates to all 6.0 users, till such time as CentOS 6.1 is released

Release Notes :- http://wiki.centos.org/Manuals/ReleaseNotes/CentOS6.0

Download CentOS 6 (32bit) :- http://mirror.its.sfu.ca/mirror/CentOS/6/isos/i386/CentOS-6.0-i386-bin-DVD.iso

Download CeontOS 6 (64bit) DVD1 :- http://mirror.its.sfu.ca/mirror/CentOS/6/isos/x86_64/CentOS-6.0-x86_64-bin-DVD1.iso

Download CeontOS 6 (64bit) DVD2 :- http://mirror.its.sfu.ca/mirror/CentOS/6/isos/x86_64/CentOS-6.0-x86_64-bin-DVD2.iso

If you start using CentOS 6 32 or 64bit versions then please let me have feedback so i can post those here, Whatever feedback is accepted.

Thanks.

 

Enjoy CentOS 6 🙂 Enjoy RHEL Clone 🙂 Enjoy Linux 🙂 Enjoy Open Source 🙂