Howto: Installing WINE on RHEL / CentOS 5.x / 6.x | 32-bit | 64-bit | x86_64 | Linux

Hello All,

There are so many request from blog visitors to write Article on Wine Installation. Thanks for your request.

This article is for Install Wine on CentOS and RHEL 5.x and 6.x easily. Actually i have planned this article through script but due to shortage of time and now a days busy too, So Couldn’t implement complete script so Demonstrating manual how to over here.

I hope you guys will like the same.

Like VLC installation on Red Hat Enterprise Linux 5.x and 6.x and CentOS 5.x and 6.x its bit complicated and So much dependencies issues are there. So To make installation a bit easier and without too much headache i am writing this article.

This HOWTO performed on Blank RHEL / CentOS 5.x and 6.x if you are running with Latest or OLD RPMs you might face issue of Dependencies. Do it at your own risk wherever you are performing this howto.

To Install WINE on RHEL/CentOS 5.x and 6.x, Perform following Howto.

For RHEL / CentOS 6 32-Bit and 64-Bit (x86_64) :-

1. You need to be root to perform rest steps.

2. This step is must otherwise you might face dependencies issues. Now Lets take a backup of your Original Repository. By Executing Following Command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mkdir /repobackup
[root@wine-on-linux-ahmedabad-tejas-barot ~]#mv /etc/yum.repos.d/*.repo /repobackup/

3. Now Clean Previously Cached Repository by Executing Following command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum clean all

4. Now Download and Install EPEL and Tejas Barot’s RPM for Wine to Install Wine on RHEL / CentOS 6.x.

To Download RPMs :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# cd /tmp
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# wget http://www.tejasbarot.com/RPMs/epel-release-6-7.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# wget http://www.tejasbarot.com/RPMs/wine-install-tejas-barot-2.0-2.noarch.rpm

To Install RPMs :-

[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force epel-release-6-7.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force wine-install-tejas-barot-2.0-2.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# cd

5. To install wine and its Packages execute following command :-

[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum install –nogpgcheck wine*

When it ask for”YES”and”NO”Please go ahead with your choice.

6. That’s it, You are done now. Wine Installed Successfully.

7. Now Revert your previous repositories. by Following commands
[root@wine-on-linux-ahmedabad-tejas-barot ~]# rm -rf /etc/yum.repos.d/*.repo
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mv /repobackup/*.repo /etc/yum.repos.d/

8. That’s It now. You have installed wine on RHEL / CentOS 6x Successfully and Your Previous Repositories also reverted back.

For RHEL / CentOS 5.x 32-Bit and 64-Bit (x86_64) :-

1. You need to be root to perform rest steps.

2. This step is must otherwise you might face dependencies issues. Now Lets take a backup of your Original Repository. By Executing Following Command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mkdir /repobackup
[root@wine-on-linux-ahmedabad-tejas-barot ~]#mv /etc/yum.repos.d/*.repo /repobackup/

3. Now Clean Previously Cached Repository by Executing Following command :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum clean all

4. Now Download and Install EPEL and Tejas Barot’s RPM for Wine to Install Wine on RHEL / CentOS 5.x.

To Download RPMs :-
[root@wine-on-linux-ahmedabad-tejas-barot ~]# cd /tmp
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# wget http://www.tejasbarot.com/RPMs/epel-release-5-4.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]#wget http://www.tejasbarot.com/RPMs/wine-install-tejas-barot-1.0-1.noarch.rpm

To Install RPMs :-

[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force epel-release-5-4.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# rpm -ivh –force wine-install-tejas-barot-1.0-1.noarch.rpm
[root@wine-on-linux-ahmedabad-tejas-barot tmp]# cd

5. To install wine and its Packages execute following command :-

[root@wine-on-linux-ahmedabad-tejas-barot ~]# yum install –nogpgcheck wine*

When it ask for”YES”and”NO”Please go ahead with your choice.

6. That’s it, You are done now. Wine Installed Successfully.

7. Now Revert your previous repositories. by Following commands
[root@wine-on-linux-ahmedabad-tejas-barot ~]# rm -rf /etc/yum.repos.d/*.repo
[root@wine-on-linux-ahmedabad-tejas-barot ~]# mv /repobackup/*.repo /etc/yum.repos.d/

8. That’s It now. You have installed wine on RHEL / CentOS 5.x Successfully and Your Previous Repositories also reverted back.

Hope this will helps you, Waiting for your feedback.

If you like this then Please Click Google +1 Button and Show Your Support. Your Support will encourage me to write more articles.

All Linux User’s Blog Mobile Applications :- http://www.tejasbarot.com/download-mobile-apps/

Enjoy Wine on Red Hat Enterprise Linux and CentOS 5.x and 6.x 🙂 Enjoy Linux 🙂 Enjoy Open Source 🙂

Howto: Installing TeamViewer 5/6 on Linux | Team Viewer | Fedora | RHEL | CentOS | Linux

Hello,

Today I am explaining How to for Installing and Working with Team Viewer. This is howto performed on Free Version of Team Viewer.

Many People questioning about Team Viewer Availability and Compatibility on Linux. But I want to tell you guys that Forget this confusion and start Using Team Viewer on Linux. Because I am using it from last 6 Months and  It is working Perfectly Fine.

I Found Many peoples who are using Team Viewer 5 with Wine or cross over,  I have also tried it but it is not that much successful. Many Times it got stuck up, disconnect and Many Problems.

It’s Possible that some people found this method very easy or some people already knows about it. But Still I want to show this howto, and want to make it open for world, So I am writing this howto for Installing and Configuring Team Viewer 5 on Linux.

This howto is Tested and working perfectly fine on Fedora 11 to 14, CentOS, RHEL ( Red Hat Enterprise Linux ) :-

Please perform following steps to Install Team Viewer 5 on Linux | Fedora | RHEL | CentOS | Red Hat Enterprise Linux.

1) Open Terminal. ( Click on Applications -> System Tools -> Terminal ). For, Red Hat and CentOS you can also Open by Right Click on Desktop and Click on Open Terminal

2) Please switch your User as root. Execute Following Command as Normal user.
[tejasbarot@tejasbarot ~]$ su –
Password:
You will get prompt like this.
[root@tejasbarot ~]#

3) Download Team Viewer 5. Execute Following Command on Linux Terminal.
wget -c http://www.teamviewer.com/download/version_5x/teamviewer_linux.rpm

For TeamViewer 6 :- http://www.teamviewer.com/download/teamviewer_linux.rpm # If you are trying this then it is possible you might face many dependencies issue. I don’t have solution for that yet.

Or You can also click on above link to Download using your Browser.

4) Now It’s Time to Install Team Viewer 5 on Linux. Execute Following Command as root.
rpm -ivh teamviewer_linux.rpm

5) Once Team Viewer Get Installed. Make sure you are switch to Normal User. Because New Team Viewer cannot be run as root.

Note :- This Team Viewer is also Using wine as its backend but it never creates problem.

You can open it by following ways.
Open Using Terminal :- Execute Command teamviewer
From GUI :-
Click on Applications -> Internet -> TeamViewer

By Following Similiar steps you can install on Ubuntu Also.

If you want to run TeamViewer as root click here, I have already found the way to run as root. Running/Open Team Viewer 5 as a root from GUI.

If Getting any difficulties or problem feel free to contact me by commenting or contacting me personally. You can get my Mail ID from About US Page.

If you like it or don’t like it Just Express through comments. Every comments accepted.

Hope this helps.

Enjoy Remote Life 🙂 Enjoy TeamViewer 🙂 Enjoy Linux 🙂 Enjoy Open Source 🙂

Install Google Voice & Video Chat using Official Google RPM | Fedora | RHEL | Linux

Hello Friends,

I was waiting for this day eagerly, After Release of Google Voice & Video chat in DEB file i was waiting for Google Official RPM for Voice & Video Chat. As i was unable to found i have tried so many things, Fortunately some things works smoothly unfortunately some not. But Now No need to do any tricks for Installing Google Voice and video chat on Fedora and RHEL Linux, Because of Huge demand from Fedora & RHEL users Google It self released Official RPM for Voice & Video Chat so it feels very Nice.

Still this is the very quick release so some bugs or problems may be there but its very good to see google for releasing very fast.

Follow below procedure to install Google Voice & Video Chat using Official Google RPM

1. You need to be root for doing this procedure.

2. Download Official RPM from below link :-

http://www.google.com/chat/video

3. Once RPM Downloaded Just Execute below Command :-

rpm -ivh google-talkplugin_current-xxxx.rpm

4. If You face dependencies error then try to link your library files as per below instructions

# cd /usr/lib
# ln -s ../../lib/libcrypto.so.1.0.0a libcrypto.so.0.9.8
#
ln -s libssl.so.1.0.0a libssl.so.0.9.8
5. Once above procedure completed just close your firefox and Google Chrome and Reopen Firefox & Google Chrome.
Thanks Google for release RPM quick, Infact very quick.
Enjoy Google Voice & Video Chat on Fedora | RHEL 🙂 Enjoy Open Source 🙂 Enjoy Linux 🙂